[ 6 ]
MOUNTING THE BASE UNIT ON A WALL
You can mount your base directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when
inserting screws into the wall.
• Mount your phone within distance of a working phone jack.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use screws with anchoring devices suitable for the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall (with their appropriate anchoring device),
100mm apart. Allow about 3mm between the wall and screwheads for mounting
the phone.
2) Plug the AC adapter into the
DC IN 9V
jack on the telephone
and then into a Standard AC wall outlet.
3) Plug the telephone line cord into the
TEL LINE
jack on the
telephone and then into the telephone socket on the wall.
4) Raise the antenna to a vertical position.
5) Align the mounting slots on the base with the mounting posts
on the wall.
6) Then push in and down until the phone is firmly seated.
This phone also can be mounted on any standard telephone wall plate
(for Australia).
3mm
100mm
35mm
UP354BH(WD2) OM 5/14/04 10:48 AM Page 6
