[ 12 ]
Answering Setup
This main menu option allows you to set up TAD settings from your handset. You can
also set these submenu options from the base (see page 45).
Submenu name
Description
Security Code
Select a two-digit Personal Identification Number (PIN) code. A PIN code is
(Default is 80)
required to play your messages from a remote location, you will need to enter
a two-digit PIN code (see page 17).
Ring Time
Allows you to set the number of rings the caller hears before your answering
(Default is 9 time)
system plays the outgoing message. You can set the ring time to answer after
four, six, or nine rings. Setting “TS” (Toll Saver), the answering system picks
up after six rings if you have new messages, and after nine rings if there are
none (see page 18).
Record Time
Set the duration for recording the incoming messages. You have three record
(Default is 1 minute)
time options. The options “1 minute” or “4 minutes” set the duration for
recording the incoming messages. “Announce only” answers the call with the
preset greeting or your personal greeting but prevents the caller from leaving
a message (see page 18).
Message Alert
Lets you know when you have a new incoming message by sounding a short
(Default is off)
alert tone (see page 18).
Call Screen
Allows you to screen an incoming call before answer the call. Set the call-
(Default is on)
screening feature to on or off (see page 18).
UP354BH(WD2) OM 5/14/04 10:49 AM Page 12
