Uniden UBCD436-PT, Руководство пользователя

Страница: 51 / 108

41
If you don’t have Excel you can download and install a viewer here, or do a simple Google
search.
The upper base frequency can also be found using the Band Plan Calculator located at:
http://info.uniden.com/twiki/bin/view/UnidenMan4/CalculatingUpperBaseFrequencies.
Also, look at Determining Base/Step/Offset for VHF/UHF Motorola Systems at Radio
Reference.com.
For Standard 800 MHz Rebanded Systems , you need to set Band Plan 1 and Band Plan 2
as follows:
Band Plan Lower Base Freq Upper Base Freq Offset Polarity Spacing
1 851 .025 854 .000 440 + 25 khz
2 851 .0125 868 .9875 0 + 25 khz
Select Plan 1-6
Select for each Band Plan.
Set Base Freq
Input Lower. Enter the lower base frequency and press E/yes .
Input Upper. Enter the upper base frequency and press E/yes .
Set Offset
Input Offset. Enter the offset and press E/yes .
Select Polarity. Scroll to + (default) or - and press E/yes .
Set Spacing.
Scroll to the step size and press
E/yes
.
Press Menu to return and repeat for each band plan as needed.
Set Frequencies
– This is where you program trunking frequencies for the Site.
New Frequency/Edit Frequency
. Enter the frequency and press
E/yes
.
For EDACS and LTR sites only:
Input LCN.
Enter the LCN number and press
E/yes
.
Delete Frequency
At Confirm Delete?, press E/yes or ./no .
Set Modulation (no P25/P25 One Freq) – This setting selects the modulation used for the Site.
The default setting is
Auto
.
Auto
,
NFM
, or
FM
See also Scanning, page 50.
Set Attenuator
– This setting controls whether the scanner attenuates signals on the Site by
about 20 dB The default setting is Off .
On or Off
See also Scanning, page 50.
Set Avoid – This determines whether a Site will be scanned or not. Temporary Avoids cancel
when you cycle power. The default setting is
Stop Avoiding
.
Stop Avoiding, Temporary Avoid
, or
Permanent Avoid
See also Scanning, page 50.
Set Location Information
– This allows you program a location for the Site to use with Location
Control enabled or with a GPS. You can program a circle with a radial range or multiple rectangles
as a location.
See Set Up GPS (page 24) first to set your location format and the Baud rate.
Circle