Uniden UBCD436-PT, Руководство пользователя

Страница: 47 / 108

37
Delete Unit ID
At Confirm Delete?, press E/yes or ./no .
Copy System
– Copying a system will copy all Sites, Departments, Channels, and settings
including quick key assignments into the current Favorites List.
See Data Naming, page 25, to name the new system.
Delete System
At
Confirm Delete?,
press
E/yes
or
./no
.
SYSTEM OPTIONS
Press
Menu
then scroll to
Manage Favorites
and press
E/yes
.
Scroll to the
Favorites List
and press
E/yes
.
Scroll to
Review/Edit System
and press
E/yes
.
Scroll to the
System
you want to edit and press
E/yes
.
Scroll to
Edit Sys Option
and press
E/yes
.
Note: Not all options will appear for all types of systems.
Set System Quick Key Priority Id Scan Clear All Id Avoids
Set System Number Tag Set Status Bit Set Audio AGC
Set Avoid Set End Code P25 NAC Option
Set Hold Time Emergency Alert P25 Waiting Time
Id Search Review Id Avoids P25 Threshold Mode
Edit fleet Map P25 Threshold Level
Set System Quick Key
– This assigns a quick key to the System and the scanner will scan the
System when the key is enabled. The default setting is . (no quick key). If you don’t assign a Quick
Key to a system, it will always be scanned unless you Avoid it.
0-99 or . for no quick key.
Note: Pressing the first number of a 2-digit quick key will get you closer, 1 for 10, 2 for 20,
etc., then scroll to second digit.
Set System Number Tag
– This allows you to number a System so you can access it quickly
from Scan Hold mode.
The default setting is no number tag. See also Using Number Tags, page 56.
Enter the number [0-99 , Blank (no number tag)] and press E/yes to save.
Set Avoid
– This determines whether a System will be scanned or not (even if the system is
enabled). Temporary Avoids cancel when you cycle power.
The default setting is
Stop Avoiding .
Stop Avoiding , Temporary Avoid , or Permanent Avoid
See also Scan Avoids, page 55.
Set Hold Time – This sets (in seconds) the amount of time the scanner will scan the System
before moving on to the next system. All (Unavoided) channels will be scanned at least once
regardless of this setting. The scanner moves to the next system after the hold time expires, any
current transmission ends, and the channel delay time expires. The default setting is 0 seconds.