Uniden UBCD436-PT, Руководство пользователя

Страница: 33 / 108

23
E/yes
Q . srCh
• Press to select a menu item or save an entry in
Menu
mode
• Press to store a blinking CTCss/dCs/naC tone in receive/hold mode .
• Press to store an id in id search mode in receive/hold mode .
• Press to add channel to Favorites list in receive/hold modes .
• Press to edit current channel in receive/hold modes .
• Press to store a unit id in receive/ .hold modes .
• Press to ‘quick store’ a frequency in search modes .
• Press func then E/yes to start a Quick search in hold mode .
• Press
func
then
E/yes
to toggle id search mode on/off in scan mode
(when scanning Trunked system in Favorites list only) .
• Press to store found tones in Tone-out search mode .
• Press to select the current Tone-out menu in Tone-out mode .
SET YOUR LOCATION ANd RANGE
Press Menu then scroll to Set Your Location and Range and press E/yes .
Scroll to through the following option and press E/yes .
LOCATION OPTIONS
Enter Zip/Postal Code Set Up GPS Edit Location
Auto Locate Set Range Save Location
Set Manual Location
Enter Zip/Postal Code – This will set the center of a zip/postal code as your location (not your
exact location) and a default scan range of 20 miles.
You can then set the range, edit the location name, and save the location.
Select your country (USA or Canada) and press E/yes .
Enter your zip code or see Data Naming, page 25, to enter a post code.
Note: You can also press the ZIP button to tenter your zip/postal code.
Auto Locate – The Auto Locate feature works by trying to monitor any Motorola or P25 system in
your area that is also in the Radio Reference Database.
The scanner will then set your location based on the system(s) it receives.
This will set the center of the discovered radio tower as your location (not your exact location) and
a default scan range of 30 miles.
You can then set the range, edit the location name, and save the location.
Press E/yes or ./no to accept the location. Press Menu to cancel.
Set Manual Location – This will set your exact location and a default scan range of 0 miles. You
can then edit the location name and save the location.
Input Latitude. Using the keypad, enter your latitude.
Press
./no to toggle N or S, and press E/yes .
Input Longitude. Using the keypad, enter your longitude.
Press
./no to toggle E or W, and press E/yes .