Uniden EXAI2980 Series, Руководство пользователя

Страница: 52 / 64

A D D I T I O N A L I N F O R M AT I O N [ 50 ]
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps f irst.
SSyym mp ptto om m
The ssttaattu uss LED won’t light
when the handset is placed in
the base.
The audio sounds weak and/or
scratchy.
Can’t make or receive calls.
The Caller ID does not display.
SSu ug gg geessttiio on n
•
Make sure the AC adapter is plugged into the base and wall outlet.
•
Make sure the handset is properly seated in the base.
•
Make sure the charging contacts on the handset and base are clean.
•
Make sure that the base antenna is in a vertical position.
•
Move the handset and/or base to a dif ferent location away from metal
objects or appliances and try again.
•
Press cch
haan n to help eliminate background noise.
•
Make sure that the handset is not too far from the base.
•
Check both ends of the base telephone line cord.
•
Make sure the AC adapter is plugged into the base and wall outlet.
•
Disconnect the AC adapter for a few minutes, then reconnect it.
•
Reset the digital security code (See page 47).
•
Make sure that the handset is not too far from the base.
•
The handset was picked up before the second ring.
•
The call was placed through a switch board.
•
Call your local telephone company to verify your Caller ID service
is current.