Uniden DECT4096 страница 49 Скачать руководство пользователя

Страница: 49 / 52

alert, finish your conversation as quickly as possible and return the handset to the cradle. If the

handset is in standby, none of the keys will operate.

With normal use, the battery should last about one year. Replace the battery when the talk time

becomes short even when the battery is charged. To buy a replacement battery, call the Parts

Department listed on the front cover.

Rechargeable Nickel-Metal-Hydride Battery Warning

CAUTION! Risk of explosion if battery is replaced by an incorrect type!

Dispose of used batteries according to the instructions. Do not open or

mutilate the battery. Disconnect the battery before shipping this product.

This equipment contains a rechargeable Nickel-Metal-Hydride battery.

The rechargeable batteries contained in this equipment may explode if disposed of in a fire.

Nickel is a chemical known to state of California to cause cancer.

Do not short-circuit the battery.

Do not charge the rechargeable battery pack used in this equipment with in any charger other

than the one designed to charge this battery pack as specified in the owner's manual. Using

another charger may damage the battery pack or cause the battery pack to explode.

rechargeable Batteries Must Be recycled or Disposed of properly.

Uniden works to reduce lead content in pVC coated cords in our products &

accessories.

Warning! The cords on this product and/or accessories contain

lead, a chemical known to the State of California to cause birth

defects or other reproductive harm. Wash hands after handling.

Compliance Information

FCC Part 68 information

This equipment complies with Part of the FCC rules & the requirements adopted by the

ACTA. On the bottom of this equipment is a label that contains, among other information,

a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be

provided to the phone company.

An applicable Universal Service Order Codes (USOC) certification for the jacks used in this

equipment is provided (i.e., RJC) in the packaging with each piece of approved terminal

equipment. A plug & jack used to connect this equipment to the premises wiring & telephone

network must comply with the applicable FCC Part rules & requirements adopted by

the ACTA. A compliant telephone cord & modular plug is provided with this product. It is

designed to be connected to a compatible modular jack that is also compliant. See installation

instructions for details.

The REN is used to determine the number of devices that may be connected to a phone line.

Excessive RENs on a phone line may result in devices not ringing in response to an incoming

call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain

of the number of devices that may be connected to a line, as determined by the total RENs,

contact the telephone provider. The REN for this product is part of the product identifier that

has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a

decimal point (e.g., 03 is a REN of 0.3).

If this equipment causes harm to the telephone network, the telephone company will notify you

in advance that temporary discontinuance of service may be required. But if advance notice



Содержание DECT4096





















































Результаты поиска

Содержание DECT4096

Отзывы:

Похожие инструкции для DECT4096

Бренды по названию

Популярные бренды

Uniden DECT4096, Руководство пользователя

Результаты поиска

Содержание DECT4096

Отзывы:

Похожие инструкции для DECT4096

Бренды по названию

Популярные бренды