Using the Caller ID and redial lists
You have to subscribe to Caller ID to use Caller ID features:
contact your telephone provider for more information.
Caller ID list information
redial list information
When a call comes in, the phone displays the
caller’s number and name (if available) along
with which line is receiving the call.
The phone saves the information for the last 50
calls received on either line to the
CID list
. The
phone records which line the call came in on.
When it's in standby, each station displays the
total number of calls received on both lines
since the last time you checked the CID list.
You can edit the list separately on each station.
-
-
-
-
Each station has its
own redial list.
The redial list contains
the last 10 phone
numbers dialed from
that station.
The redial list does
not record which line
was used to dial the
number.
-
-
-
Using the lists
Open the CID list
Press
CAllEr ID/rIGHT
.
Open the redial list
Press
rEDIAl/PAUSE
.
Scroll through the
CID or redial list
Press
DoWN
to scroll through the list from newest to
oldest. Press
UP
to scroll from oldest to newest.
Close the CID or
redial list
Press
END
on a handset or
mUTE/ExIT
on the base.
(If you open the CID list during a call, press
BACK
to
back out of the list without hanging up.)
Dialing from the CID or redial list
Find the entry you want to dial.
If the phone number is a toll or long distance call, but there's no
1
at the front of the record, press to add the
1
.
To dial the entry with the primary line for this station, press
TaLk/
FLasH
or pick up the corded handset from the base; to manually
choose a line, press
LINe1
/
LINe2
to dial the entry.
You can also go off hook before you open the list. Press
TaLk/FLasH
or pick up the corded handset (for the primary line) or press
LINe1
/
LINe2
. Find the entry you want, then press
DIaL
.
1.
2.
3.
