Setting Up Your Phonebook
Creating a new entry
Open the phonebook with the phone in standby, and press
NeW
.
The phone walks you through the phonebook entry items in the order
listed below. On each screen, press
ok
when you're finished editing
the item or if you want to skip the item:
Edit
Name
Enter the name (up to 16 characters) you want to use for this
entry.
Edit
Number1
Enter the primary number (up to 32 digits) for this entry
exactly the way you would dial it.
If you need the phone to wait before sending the next set of
digits, press
rEDIAl/PAUSE
to enter a two-second pause.
If two seconds isn't long enough, you can enter as many
pauses as you want.
Each pause counts as one digit (you'll see a
P
in the number).
-
-
-
Edit
Number2
Enter the secondary number for this entry just like you did the
primary number.
Personal
Ring
selection
(Handset only) Choose the ring tone you want the handset to
use when this person calls. As you highlight each ring tone,
the handset sounds a sample of that tone.
Speed
Dial
Select the speed dial number (
SPD0
through
SPD9
) you want
to assign to this entry.
The speed dial numbers correspond to the numbers (0
through 9) on the twelve key dial pad.
Each speed dial number can be assigned to only one entry.
If the speed dial number is already assigned, the phone
shows the name of the entry assigned to the number. If
you want to change it, select the number, and the phone
overwrites the existing assignment.
-
-
-
