Uniden Bearcat BCD396T, Руководство пользователя

Страница: 38 / 51

Easier to Read BCD396T/UBCD396T Digital Scanner Manual
Set CC Alert/Beep/Pause
lets you select how the scanner alerts you when it receives a Close Call signal. Pause lets you select how long the scanner waits after a hit
before it returns to the previous operation.
Scroll to '
Set CC Alert
' and press
E/yes
.
At '
Set CC Alert
' scroll to '
Select Mode
' and press
E/yes
.
At '
Select Mode
' scroll the mode you prefer and press
E/yes
.
Beep , the scanner beeps when it receives a Close Call signal.
Light , the backlight turns on when it receives a Close Call signal.
Beep+Light , the scanner beeps and the backlight turns on when it receives a Close Call signal.
None , the scanner does not alert.
Scroll to '
Select Beep
' and press
E/yes
.
At '
Select Beep
' scroll to ' Alert 1-9 or Off ' and press
E/yes
.
At '
Set Level
' scroll to ' Level 1-15 or Auto ' and press
E/yes
.
Scroll to '
Set CC Pause
' and press
E/yes
.
Scroll to '
3, 5, 10, 15, 30, 45, 60 sec,
or
Infinite
' and press
E/yes
.
Press
Menu
to return.
Contents
Set CC Override
lets you select how the Close Call feature works while scanning or searching . This setting has no effect in 'Close Call Only' mode.
Scroll to '
Set CC Override
' and press
E/yes
.
Scroll to
On
or
Off
and press
E/yes
.
With this feature On , when the scanner detects a Close Call signal while scanning, the scanner overrides the current audio with the Close Call hit.
'
CC Found!
' and '
Press Any Key
' appear for the length of time set in Close Call Pause (or until the signal is lost if longer).
With this feature Off , when the scanner detects a Close Call signal while scanning, the scanner does not override the current audio.
'
CC Found!
' and '
Press Func Key
' appear for the length of time set in Close Call Pause .
Set Close Call Mode
this turns Close Call on when scanning or searching. You can also do this by pressing and holding
Func
then pressing
Hold
while scanning or
searching.
Scroll to '
Set CC Mode
' and press
E/yes
.
Scroll to 1 of 3 modes and press
E/yes
to save and exit.
Off - Close Call is turned off.
CC DND - (Requires firmware 3.00 or newer) Close Call checks for frequencies every two seconds between transmissions.
Pri - Close Call checks for frequencies every two seconds.
Close Call Only
this setting puts the scanner in Close Call Only mode. The scanner will not scan or search programmed frequencies.
At '
Close Call Only
' press
E/yes
.
Press
Scan/Srch
to exit.
Using Close Call Modes
To start Close Call Only
mode press
Menu
. Scroll to '
Close Call
' and press
E/yes
. At '
Close Call Only
' press
E/yes
.
To use Close Call while scanning or searching
, press and hold
Func
then
Hold/
to toggle
Close Call Priority
,
Close Call DND
, or
Off
.
Managing Close Call Hits
Contents
In Close Call
Only
mode:
http://marksscanners.com/396/396.shtml (38 of 51)8/17/2010 10:11:40 PM