Uniden Bearcat BCD396T, Руководство пользователя

Страница: 21 / 51

Easier to Read BCD396T/UBCD396T Digital Scanner Manual
To select a Preset Fleetmap , scroll to '
Preset
' and press
E/yes
.
Scroll to the number of the preset fleetmap and press
E/yes
to save and exit. See Preset Fleetmaps .
To program a Custom Fleetmap , scroll to '
Custom
' and press
E/yes
.
At '
Block 0
' scroll to the size code (
0-14
) and press
E/yes
. See Size Codes .
The scanner will prompt you to the next block (
1
) to scroll to the size code (
0-14
) then press
E/yes
.
Repeat for each block (0-7) and you will return to the '
Edit Sys Option
' menu.
Note:
If you select size code 12, 13, or 14, these restrictions apply:
12 can only be assigned to Blocks 0, 2, 4 or 6.
13 can only be assigned to Blocks 0 and 4.
14 can only be assigned to Block 0.
Since these size codes require multiple blocks, you will be prompted for the next available block. For example, if you assign Block 0 as 12, the
scanner prompts you for block 2, the next block available, instead of block 1. If you assign Block 0 as 14, you would not see another prompt
because 14 uses all available blocks.
Set Status Bit (Motorola only)
sets how your scanner works with status bits (also called S-bits), letting you control how the scanner interprets and displays Motorola
talkgroup IDs. The default setting is ignore.
Scroll to '
Set Status Bit
' and press
E/yes
.
Scroll to one of two settings and press
E/yes
to save and exit.
Ignore - the scanner rounds all received ID's down to the next interval of 16.
Yes - the scanner treats all received ID's as unique ID's.
Contents
Set End Code (Motorola only)
sets how the scanner handles the transmission end code sent by most Motorola systems. The default setting is Yes.
Scroll to '
Set End Code
' and press
E/yes
.
Scroll to one of two settings and press
E/yes
to save and exit.
Yes - the scanner immediately returns to the control channel when it detects the end code.
Ignore - the scanner does not return to the control channel until the carrier drops.
Digital End Code (
P16
Motorola only)
(Requires firmware 3.00 or newer) Might be a solution to the issue that systems with stuck repeaters hang the scan cycle for
P16 Motorola 3600 bps digital systems .
Scroll to '
Digital End Code
' and press
E/yes
.
Scroll to '
Yes
' or '
Ignore
' and press
E/yes
to save and exit.
Set I-Call (Motorola/EDACS only)
sets whether the scanner will monitor I-call IDs. I-calls (or private calls) are transmissions made from one radio user to another
radio user and not heard by everyone else in the trunking system. The default setting is off.
Scroll to '
Set I-Call
' and press
E/yes
.
Scroll to one of three settings and press
E/yes
to save and exit.
Off - the scanner ignores I-call IDs.
On - the scanner tracks I-call IDs.
Only - the scanner tracks only I-call IDs and ignores other radio traffic on the system.
Contents
Emergency Alert (Motorola/EDACS only)
sets how your scanner handles IDs that have the emergency flag set. The default setting is off.
Scroll to '
Emergency Alert
' and press
E/yes
.
Scroll to the alert (
Alert 1-9
or
Off
) and press
E/yes
.
http://marksscanners.com/396/396.shtml (21 of 51)8/17/2010 10:11:40 PM