53
Troubleshooting
Resetting the Scanner
If the scanner's display locks up or stops operating
properly, you might need to reset the scanner.
Caution: This procedure clears all the information
you have stored in the scanner. Before you reset the
scanner, try turning it off and on to see if it begins
working properly. Reset the scanner only when you
are sure it is not working properly.
1. Turn off the scanner.
2. While holding down
2
,
9
, and
Hold
, turn on the
scanner. It takes about 3 seconds to initialize
and
CLEAr
appears.
Weather
scan
doesn’t
work.
The squelch
might need to
be adjusted.
Adjust the squelch
threshold. See
“Turning On The
Scanner and
Setting Squelch” on
Page 33.
The antenna
might need to
be adjusted.
Check the antenna
connection.
Содержание BC92XLT
Страница 1: ...BC92XLT OWNER S MANUAL OWNER S MANUAL...
Страница 17: ...17 Understanding Scanning For more information about Uniden and our other products visit http www uniden com...
Страница 62: ...62...
Страница 63: ...63...