45
Special Features
Storing Frequencies Found During Direct
Entry Search into Channel Memory
Follow these steps to store frequencies received
during direct entry search mode or direct entry
search hold mode.
1. Press
Func
+
Pgm
in direct entry search mode
or direct entry search hold mode. The frequency
and lowest blank channel alternate on the
display.
2. Press
E
to store the frequency into the blank
channel. To select another channel, repeatedly
press
Func
+ or
Func
+ to select the blank
channel you want, then press
E
. You can also
use the 0-9 keys to select the bank.
If you enter a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was duplicated. If
you entered the frequency by mistake, press
.
To enter the frequency anyway, press
E
to accept.
The scanner moves to program mode after you
stored the frequency.
Search Skip Memory
You can skip up to 50 specified frequencies during a
search. This lets you avoid unwanted frequencies or
those already stored in a channel.
Notes:
•
You cannot skip frequencies during WX service
search.
•
Search skip frequencies are shared by service
search, direct entry search, chain search, and
Close Call modes. If skip frequencies are sent in
certain mode, the frequencies are also skipped
in other search modes and Close Call mode.
Содержание BC92XLT
Страница 1: ...BC92XLT OWNER S MANUAL OWNER S MANUAL...
Страница 17: ...17 Understanding Scanning For more information about Uniden and our other products visit http www uniden com...
Страница 62: ...62...
Страница 63: ...63...