42
Special Features
Press
0
-
9
to enable or disable the search bank
number being searched in this mode. Enabled bank
numbers appear. (Disabled bank numbers
disappear).
At least one search bank must be enabled. (The
scanner sounds an error tone if you try to disable all
the search banks). The search bank and the
frequency where chain search starts depends on
how the scanner was set before you selected chain
search mode.
Chain Search Hold Mode
To start chain search hold mode, press
Hold
in
chain search mode. The scanner stops searching
and
Hold
appears. In this mode, pressing
Func
+ changes the search direction downward
and pressing
Func
+ changes the search
direction upward. or appears according to the
current search direction.
Storing Frequencies Found During
Chain Search into Channel Memory
You can store frequencies you find in chain search
mode or chain search hold mode.
1. Press
Func
+
Pgm
in chain search mode or
chain search hold mode. The lowest blank
channel and bank appear.
2. Press
E
to store the frequency into the blank
channel. To select another channel, press
Func
+ or
Func
+ before you press
E
. You can
also press 0-9 to select the bank.
If you try to save a frequency that is already stored,
the scanner sounds an error tone and displays the
channel that was duplicated. If you entered the fre-
quency by mistake, press . To enter the frequency
anyway, press
E
to accept.
Содержание BC92XLT
Страница 1: ...BC92XLT OWNER S MANUAL OWNER S MANUAL...
Страница 17: ...17 Understanding Scanning For more information about Uniden and our other products visit http www uniden com...
Страница 62: ...62...
Страница 63: ...63...