35
Operation
press
Func
+ or
Func
+ to step through the
frequencies.
To release the hold and continue searching, press
Hold
. Or, if you did not press
Hold
, simply press
Func
+ or
Func
+ to continue searching.
Note: Because there are many different frequencies
allocated to fire and police departments, it can take
several minutes to search all the service frequencies.
Storing Frequencies into Channels
During Service Search
You can store frequencies you found during service
search or service search hold mode into channels.
1. Press
Func
and
Pgm
during service search or
service search hold mode. The frequency and
the lowest blank channel alternately appear.
2. Press
E
to store the frequency into the blank
channel. If you want to select another channel,
press
Func
+ or
Func
+ before you press
E
. You can also use the 0-9 key to select the
bank.
If you entered a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was duplicated.
If you entered the frequency by mistake, press
then enter the correct frequency. To enter the
frequency anyway, press
E
to accept.
Scanning the Stored Channels
To begin scanning channels, press
Scan
.
The scanner scans through all non-locked channels
in the activated banks. (See “Locking Out Channels”
on Page 48 and “Turning Channel-Storage Banks
On and Off” on Page 47). When the scanner finds a
Содержание BC92XLT
Страница 1: ...BC92XLT OWNER S MANUAL OWNER S MANUAL...
Страница 17: ...17 Understanding Scanning For more information about Uniden and our other products visit http www uniden com...
Страница 62: ...62...
Страница 63: ...63...