The events detail box for event 3 will open. This event sets the reset time
when A=B. A is the TOD (Time of Day) and B is the required time. 100 is 1
AM. 1300 is 1 PM. You can change the time and hit OK.
To select what to log, open the Log Buffer panel. Use the spacebar to select
the data you wish to log at each log interval (the spacebar toggles the X on
and off).
When you have finished editing the Scheme, select Scheme from the toolbar,
then Save As.
Automatic Evaporation System
OPERATING THE SITE 35
The Log Buffer Panel.
The Events Detail Panel.
You should save it with a scheme name that identifies your site. This scheme
must be used each time you connect to this data logger.
6.3
To Start Logging Data
Connect your computer to the data logger using the correct UNIDATA cable
and then:
1.
Start the STARLOG V3 software.
2.
Select the scheme for the site.
3.
Select Program logger with scheme.
4.
Click OK to continue.
The scheme will be loaded and logging will commence automatically.
UNIDATA
36 OPERATING THE SITE
