NERO / NERO INSTANT
Page 40
Version 1.4 / January 2018
ТМ
6.0 VENDING MACHINE CONTROL AND MONITORING DEVICES
The control system and control the machine consists of the following electronic components:
• Power supply board. Performs automatic actuating device management functions, interrogates sen
-
sors and controls the beverage preparation process. The power board contains all the recipes and
configurations.
• Controller Board (Main Board). Records statistics controls the vending machine operating mode, works
with USB flash drives to save audit data, loads configuration files and updates the vending machine
software. The Circuit Board stores all vending machine settings, except for recipes/product images and
product names/descriptions in different languages.
• PC unit (Monoblock). Performs functions of information display and interacts with clients, stores im
-
ages and names/descriptions of all products in different languages, and controls the Main Board, for
which purpose it’s connected via the Ethernet.
The main vending machine mode is the vending mode, in which the customer service and vending
machine units and components monitoring are implemented. The switching to this mode is carried out
immediately after the vending machine (controller) is switched on.
The service mode is intended for equipment testing, units and components parameters adjusting, and
information about the drinks management (name, price, recipe, etc.)
The switching to the service mode open the vending machine door and insert the service key into the
door trip (see section 2.2).
Then press the button (operator menu or menu technician) on the quick access keypad, located on the
inner side of the vending machine door (see section 5.2).
