NERO / NERO INSTANT
Page 94
Version 1.4 / January 2018
ТМ
13.0 WORKING WITH USB fLASH DRIVE
The machine’s Regulator allows Machine’s configuration, software updates and data recovery by ex
-
changing files using a USB drive (flash drive).
The drive is connected to the USB MB connector, located on the vending machine door inner surface
(see fig. 5.2 pos. 10 and fig. 13). The connection should be made when in vending mode.
When you connect the USB drive the Machine’s screen will show relevant information about the drive.
Fig.13.1 - Connector USB
To work with the machine is only suitable USB-flash drives! Disk drives and flash drives
are not supported. Supports USB-flash drives with FAT16 or FAT32. Other file systems
(including NTfS) not supported!
Information that can be read on the USB-flash drive with the machine:
Statistical data (Audit):
Information about the Machine’s operations, sales, equipment functioning and
logs. Stored in a file format EVA-DTS, file name:Axxmmddi.DTS. If the Machine’s clock’s not working the
file name will be Axx_i.DTS.
- хх = 2 last two digits of the serial number, set in the Technician’s menu.
- mm = Month (if date and time are set for the Machine)
- dd = Day (if date and time are set)
- i = digit from 0 to 9. You can save up to 10 files with different names in 24 hours.
To read the information you want to insert USB-flash drive into the connector of the controller board in
the trade regime and approve the request:
Save audit
?
The current configuration:
File format EVA-DTS. File name: Cxxxxxxx.DTS, C then the 7-digit serial
number of the machine, specified (for example: C0000123.DTS).
This file contains equipment configuration information, as well as information about the names, place
-
ments and prices of products.
The configuration file may include the user images of drinks, which were loaded by using the Planogram
menu. Check the image to activate
Images are imported
.
OPERATOR
TECHNICIAN FLUSHING
TEST
USB