3
UART
UM220-IV M0 module supports data transfer and firmware upgrade; the signal
input/output level is LVTTL. The default baud rate is 9600bps, and is adjustable, can be
configured up to 115200bps.
1PPS
UM220-IV M0 outputs 1PPS with adjustable pulse width and polarity.
2
Product Installation
2.1
Installation Preparation
UM220-IV M0 Modules are Electrostatic Sensitive Devices and require special
precautions when handling
.
Follow the steps in section 2.2 in the correct order.
Electrostatic discharge (ESD) may cause damage to the device. All operations
mentioned in this chapter shall be carried out in an antistatic workbench, using
both wearing an antistatic wrist strap and a conductive foam pad. If antistatic
workbench is not available, wear an antistatic wrist strap and connect the other
end to a metal frame to play a role in anti-static.
Hold the edge of the module, not in direct contact with the components.
Please check carefully whether the module has obviously loose or damaged
components. If you have questions, please contact us or your local dealer.
Figure 2-1 shows the typical installation of UM220-IV M0 EVK suites.
Figure 2-1
UM220-IV M0
Antenna
