6
Revised 13/12/21
01865 767676
www.unicol.com
STEP 2
(OPTIONAL)
With the VCCS assembled hook the top bracket
over the rail of the PZX screen mount back plate.
The normal position is central on the rail but you
can slide it from side to side.
STEP 3
(OPTIONAL)
In order to allow the VC unit to position under the
screen there is up & down adjustment. To adjust
the unit remove or loosen the screws shown
arrowed and move the arms to the desired position.
STEP 4
(OPTIONAL)
The Soundbar fits to the bottom bracket on the
arms. The VC unit fits to the small platform above
the sound bar bracket. Cable up routing up the
arms through the aperture in the PZX screen mount
back plate.
STEP 1
(OPTIONAL)
If fitting the VCCS Soundbar & VC Mount locate the
component shown exploded above. If the screen is
aleady fitted it is easier to remove this in order to fit
the VCCS unit. Reverse steps 8 & 9 above.
VC Unit
Soundbar
ACCESSORIES – SOUNDBAR & VC MOUNT
