7
Revised 13/12/21
01865 767676
www.unicol.com
ACCESSORIES – GLASS SHELF
STEP 2
(OPTIONAL)
With the shelf assembled hook the top bracket over
the rail of the PZX screen mount back plate. The
normal position is central on the rail but you can
slide it from side to side.
STEP 1
(OPTIONAL)
Assemble standard or large shelves the same way.
Remove allen screw shown above so that the top
arm clamp can be lifted clear. Position shelf so
that the fixing hole aligns with hole on bottom arm
clamp. Refit top arm clamp into slots and fix with
allen screw.
STEP 3
(OPTIONAL)
Secure the shelf arm by tightening the bottom
securing pozi drive screw against the bottom rail on
PZX backplate. (Diagram viewed from behind).
STEP 4
(OPTIONAL)
Adjust the height of shelf by loosening the pozidrive
screws on the sides of the arm and sliding up or
down. Retighten at desired height.
