3
Revised 13/12/21
01865 767676
www.unicol.com
STEP 1
For a trolley version, tap castors with the rubber
mallet until they lock into place ensuring braked
castors are at the front. (as shown above).
For a stand version, insert the plastic feet.
STEP 2
Connect base to mast as shown using the 6 x M12
x 35 hex head screws
STEP 4
(view from rear)
Locate the mount adapter and fix it to the rear of
PZX screen back plate using the 4 x M10 x 25 Hex
Head Screws
STEP 3
In preparation for cabling up later remove the mast
top rear cover by removing the 10 x M6 x 16 Button
Head Allen screws.
If there is an external signal or network cable to
connect, remove the bottom cover. (10 screws).
Put aside and retain.
Front
