June 7, 2004
45
Field Name
Description
Value(s)
Arch Path
This field defines the full path name of the directory in which
the PPS stores the pager configuration files. Ordinarily, this
parameter is initialized during execution of the setup
program and does not need to be changed.
C:\PF56AFLX\ARC
(any directory path)
SW Password
A software password can be entered to prevent unauthorized
use of this program. If no password is required, leave this
field blank.
If you used a password during Setup, this field uses it. If you
did not use one during Setup, you can insert one now.
(
blank
)
Com Port
This field specifies the serial communication port the
programming interface uses to communicate with the pager.
Ensure the communications port selected is not used by
another software application; some RAM-resident desktop
organizers reserve a communications port for their own use.
NOTE:
The program uses COM1 as the default
communications port. If both a serial port and a modem are
used on the computer, it is recommended that COM1 be
used as the serial port. If COM1 cannot be used, change the
default to COM2 in the computer configuration screen.
COM1
COM2
COM3 (when available)
COM4 (when available)
Bit Rate
This is the bit rate or speed at which the communications
port sends data bits. Pressing the space bar toggles through
the valid choices.
300
600
1200
2400
4800
9600
19200
Parity
This is the method used to check for parity or error.
None
Even
Odd
Data Bits
This field defines the number of data bits per byte. Pressing
the space bar toggles between the choices.
8
7
Stop Bits
This field defines the number of stop bits to use. Pressing
the space bar toggles between the choices.
1
2
Printer Port
Select the printer port used to connect the computer to the
printer.
PRN1
PRN2
