unication Alpha Elite, Руководство программиста, Страница: 37 / 59

28 June 7, 2004
Manual Alert Reset
With
Yes
selected and the pager in the audible mode, an
incoming message alert can only be stopped manually by
pressing any button on the pager.
NOTE:
If this field is set to
Yes ,
the
Alert Duration
field does not apply to individual, group, or priority page
alerts.
Yes
No
Low Battery Alert
Specifies whether an alert is emitted when a low-battery
condition is reached.
With this field enabled, a selected 12-second alert duration is
reduced to a 2-second alert, and a selected 2-second alert
duration is reduced to a 1-second alert when a low battery
condition is detected.
Yes
No
Real Time Clock
With
Yes
selected, a real time clock displays the time and
date.
Yes
No
Internat’l Date
(DD/MM/YY)
When
Yes
is selected, the date is displayed in the
international (day-month-year) format.
No
Yes
Show Time Stamp
With
Yes
selected, the pager displays a message’s time
stamp when it is being read. The time stamp is shown at the
very end of the message before the source prompt, if
Show
Source
is enabled.
Yes
No
Individual Message
Alarm
If
Yes
is selected, you can attach an alarm to a particular
message, with a specified time to initiate the alert.
Yes
No
Auto Alarm Turn On
With this field selected and any type of alarm selected, the
pager automatically turns on and gives an alarm alert rather
than a power-up alert if the pager is off when the alarm
expires.
Yes
No
Allow Private Time
Allows the pager to use Private Time which is a time period
specified by the user when the pager goes into completely
silent mode. When activated, the pager continues to receive
messages but does not generate any alerts.
Yes
No
Vibrator
If
Yes
is chosen, you can enable the vibrator in the pager. If
you change the alert mode to silent and
No
is selected, the
pager does not emit a vibration.
Yes
No
Out of Range Time
If a time is selected, pager is “out of range” when it does not
detect a FLEX frame for that time period. OOR time must be
less than or equal to the parameter set in the
Timeout
for Reacquisition
field.
If
None
is selected, the OOR field is disabled. All times are
+/- 10%.
None
4 min
6 min
8 min
Enable OOR Alert
If
Yes
is chosen, the pager alerts when it is out of range.
No
Yes
Field Name Field Description Value(s)
PAGER PROGRAMMING SOFTWARE Product Family Alpha Elite
Using Your PPS