June 7, 2004
7
Product Family Alpha Elite
PAGER PROGRAMMING SOFTWARE
Getting Started
Starting the Software
After installing the program on your hard drive, follow these steps:
1.
Turn on your computer.
2.
At the C:\> prompt, change to the drive where the PPS is installed (if it is not
in the C: drive).
3.
At the drive prompt, type
cd PF56AFLX.
The pathname is the directory path
where the PF 56A FLEX software is installed.
4.
Type
PF56AFLX
and press
E
.
A brief introductory message is displayed.
5.
Press any key to continue.
Software Password
If you selected a password during setup, enter it on the screen shown below and
press
E
. Use the
B
and
D
keys to correct any typing errors while entering
the password.
➧
If you type an incorrect password three times, the program ends. If you did not
select a password during the installation, this screen does not display.
