Unical NOVAIREX 35 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 56

background image

41

Tec

hnical f

eatures and dimensions

3.13.2 - USE OF USER INTERFACE

The front display of the board provides direct reading of the
temperatures and operating status of the boiler; you may use the
keyboard to scroll the screens to check the operating conditions
according to the following wordings:
1 “

Boiler Temp.”

is the boiler flow temperature.

2 “

Boiler Ret.”

is the boiler return temperature.

3 “

Temp. Flue Gas”

is the combustion flue gas outlet temper-

ature.

4 “

Solar Pan.

” is the temperature measured at the solar panel

flow.

5 “

Solar Exch.

” is the low point temperature of the dual coil

storage tank or combined storage tank (TANK in TANK) or
PUFFER also called Solar Exchanger because it is usually
in the low point.

6 “

Storage Tank Temp.

” is the temperature available in the

domestic hot water tank; in case of combined storage tank
(TANK in TANK) or PUFFER it measures the available heat
with regards to the heating system (Puffer High Point).

7 “

Fan Speed”

.

8 “

Residual Time”

is the residual time activated during boiler

ignition phase

Display procedure:

The screens can be scrolled by using the direction arrows

and

present on the panel.

Boiler temperature adjustment procedure:

Boiler temperature may be adjusted by pressing key

for

about 3 seconds; in this way the list of parameters is accessed.

Scroll the parameter list with the direction keys

and

on the panel and select parameter “P 0”.

Press key

and the selected parameter will start flashing;

increase or decrease the value respectively with keys

and

.

Confirm the change by pressing key

.

To exit the parameter list, press key

for about 3 seconds.

Parameter “P 0“ is the only parameter of the list of which the
user may change the adjustment range between 70 and 85°C.
Changing the values of the remaining parameters is re-
served to the qualified technical personnel.
Changing these parameters by unskilled persons may lead
to incorrect operation of the appliance and jeopardise its
integrity.

«
...
39
40
41
42
43
...
»

Содержание NOVAIREX 35

























































Отзывы:

Нет отзывов

Похожие инструкции для NOVAIREX 35

Бренд: E-Tech Страницы: 32

Gas 220 Ace 160

Бренд: REMEHA Страницы: 92

Бренд: Raypak Страницы: 2

Бренд: Buderus Страницы: 36

Бренд: Weil-McLain Страницы: 12

Бренд: PEERLESS Страницы: 48

Бренд: U.S. Boiler Company Страницы: 92

ECOTEC PLUS VU 80

Бренд: Vaillant Страницы: 76

Бренд: NTI Страницы: 4

Бренд: Bosch Страницы: 68

Logano plus GB312

Бренд: Buderus Страницы: 96

Бренд: Clean Energy Страницы: 54

Бренд: Vaillant Страницы: 40

Бренд: broag Страницы: 16

Бренд: Aerco Страницы: 63

Electric Water Boilers

Бренд: Bryan Boilers Страницы: 17

Boiler Elektro BE14

Бренд: Truma Страницы: 6

Бренд: Ideal Boilers Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды