Unical KTsmart, Инструкция по установке и использованию

Страница: 44 / 48

44
16.4.3 Device setting
The device setup screen allows you to change the name associated with the programmable
thermostat and the unit of measurement.
To make the changes successful, press the button “SAVE SETTINGS”; instead press the
key to cancel.
16.4.4 Edit network
From the drop-down menu on the main page of the programmable thermostat, it is possible
to access the page for changing the network of a programmable thermostat.
The procedure requires to be connected to the direct network generated by the device with
the name “Kblue_XXXXXX” (to activate it, see the paragraph on WiFi Confi guration).
Until you connect to the direct network, the screen shown on the right will appear.
Once connected to the direct network you will have to enter the name of the WiFi network
and the password to which the programmable thermostat will be connected.
Confi gure the access via DHCP or by entering a static IP.
Once the settings have been confi rmed, the network modifi cation procedure ends and the
programmable thermostat connects to the new network inserted.