Unical KTsmart, Инструкция по установке и использованию

Страница: 18 / 48

18
12.3 Display settings
Select the icon to the side to access the display settings page.
With the arrow keys you can scroll between the items Standby, Brightness, Home page and Timer SYNC.
After the changes use the confi rmation button to exit by saving, otherwise press the button to cancel.
12.3.1 Standby
You can set the preset time after which the screen will turn off due to inactivity.
When the text Standby is blue, press the centre of the display to enter edit.
In this situation the modifi able parameter turns blue and with the arrow keys it is possible to modify the value. To
complete the change, press the centre of the display again.
By setting OFF in Standby the display is always active.
12.3.2 Brightness
Allows you to change the brightness of the display during normal operation.
The parameter change occurs as in the previous point.
12.3.3 Home page
It is possible to enable an automatic page change 2 minutes after the last pressure on the display. The pages that can
be chosen are: disabled (page change not enabled), date and time or thermoregulation, based on system programming.
12.3.4 SYNC Orologio
This function allows you to synchronise the date and time of the programmable thermostat via cloud based on the set-
tings (time zone) set in the device pairing phase.
When the text SYNC Timer is blue, press the centre of the display to enter edit.
In this situation the modifi able parameter turns blue and with the arrow keys it is possible to modify the value. To
complete the change, press the centre of the display again.
12.3.5 DTS - Daylight Saving Time
This function allows you to enable/disable the switch between Daylight Saving Time (DTS) and Standard Time (STD). If
you turn it OFF you mantain the STD for all year long; if you turn it ON, the system will manage the switch, in the expected
days, from STD to DTS and vice versa.