Unical KTsmart, Инструкция по установке и использованию

Страница: 16 / 48

16
11. Programmable thermostat page
From the main page by selecting ensures access to the setting page of the programmable thermostat slots.
It is possible to activate up to a maximum of 8 different slots for the single days of the week. For each slot the SETPOINT
temperature and the slot end time must be defi ned.
The fi gure shows an example of a confi guration for Monday: use the button at the top right to move between the
various days. The display shows 4 lines that show the data set in 4 slots of the selected day. The third line, displayed with
larger characters, indicates the selected slot and can therefore be modifi ed.
To change the SETPOINT and end slot time, fi rst select the data in the fi rst column and use the arrow keys
to move
to the slot you want to change.
Select the second column to change the SETPOINT temperature always using the arrow keys
.
Finally, select the third column to change the end slot time.
During the modifi cation phase the data will be highlighted in blue, the temperature icon associated in the Temperature
menu (see chapter 12.5.1) will be also displayed. In the fi gure of reference slot 1 with SETPOINT at 17.0°C corresponding
to the slot Economy is highlighted.
To exit by saving the changes made, press the confi rmation button otherwise press the button .
Example confi guration with 3 daily slots:
from 00:00 to 7:00 17°C
from 7:00 to 20:00 20°C
from 20:00 to 23:59 16°C
1. Select the fi rst column of the third line and scroll with the arrows to position on slot 1.
2. Then highlight the temperature column and use the arrows to set the value 17°C.
3. Then go to the third column to defi ne the end of the fi rst slot at 7:00.
4. Select the fi rst column again and use the arrows to move to slot 2.
5. Highlight the temperature column and set the value 20°C.
6. Complete the programming of the second slot by defi ning the deadline at 20:00.
7. Finish the settings by defi ning the data of the third slot remembering to set the value 23:59 to defi ne the end of the day. The remaining slots
4, 5 and 6 not being used always show the end of 23:59.
11.1 Copy day function
When the climatic zone settings are repeated in the various days, it is possible to use a convenient function that allows
you to copy the confi guration of one day into others.
To use it, access the programmable thermostat slot setting page and use the button to position on the day to copy.
At this point, press the copy button at the top left of the display to open the page where you can select the days in which
to copy the slot settings.
The arrow keys
allow you to scroll through the days while to select or deselect the single day simply press on the
name itself.
To exit by saving the changes made, press the confi rmation button otherwise press the button .