Unical KTsmart, Инструкция по установке и использованию

Страница: 28 / 48

28
13.5.3 Humidity comparison
It allows to set the second output of the programmable thermostat for the relative humidity management.
Once selected, the choice of humidity limit appears in the installer menu.
13.5.3.1 Humidity threshold
It allows to set the humidity threshold beyond which the second programmable thermostat output is activated.
13.5.4 Boiler consent
Available only in the RR version of the programmable thermostat, it allows you to replicate on the second relay output the
behaviour of the fi rst output.
13.6 Maximum heating setpoint limit
It allows to set a maximum temperature SETPOINT limit in manual and temporary manual mode.
Select the item in the menu, use the arrow keys
to change the value and then confi rm by pressing the button to
exit by saving, otherwise press the button .
13.7 Minimum cooling setpoint limit
It allows to set a minimum temperature SETPOINT limit in manual and temporary manual mode.
Select the item in the menu, use the arrow keys
to change the value and then confi rm by pressing the button to
exit by saving, otherwise press the button .
13.8 Fan Coil module
On/Off : this function allows you to enable the control of the new ETH-S04FC fan coil module from the thermostat.
13.9 Installer password
It allows you to set a protection password for access to the Installer Confi guration menu.
Select the item in the menu, type the desired password twice and confi rm by pressing the button
to exit by saving,
otherwise press the button .
If you wish to delete the entered password, enter the following combination:
000000
If the password is forgotten, the device must be reset (see chap. 12.6.4).