![Unical KTsmart Скачать руководство пользователя страница 25](http://html1.mh-extra.com/html/unical/ktsmart/ktsmart_instruction-on-installation-and-use_3719680025.webp)
25
13. Installer confi guration
The installer confi guration page allows you to change the bus confi guration, reset the WiFi card, reset the
programmable thermostat to factory settings, set temperature and humidity offset, change the language, confi gure
the type of output and set the maximum and minimum limits of the temperature setpoint.
Further settings differ depending on the programmable thermostat model if in the RR confi guration (with 2 bistable relay
outputs) or in the RA confi guration (with 1 relay and 1 analogue output).
Use the arrow keys
to select the desired item in the menu and make some changes.
After changing the parameters use the confi rmation button
to exit by saving, otherwise press the button .
13.1 BUS confi guration
The programmable thermostat can be confi gured for automation management (Klever) or in stand alone mode by
selecting “none” in the bus confi guration fi eld.
Use the arrow keys
to select the type of bus. Once the choice is confi rmed, the device restarts automatically.
The confi guration of the Klever bus activates the scenarios and unlocks the Klever menu, parallel sections of the installer
menu, which allows control of the individual outputs of the ETH-S64RB, ETH-I42TR, ETH-S64A modules.
13.1.1 Klever
The Klever bus allows the management of lights and automations via App or physical buttons if the ETH-S64RB,
ETH-I42TR and ETH-S64A devices are connected for the management of lights and automations.
The submenus Name, Installation Type, System Management, System Info are available in this menu described
in the following sections.
13.1.1.1 Name
The use is similar to the keypad of a mobile phone where to select the desired font you must press the
corresponding key several times. When you start entering fonts the text preview is displayed at the top of the page. During
the choice of the font the text is highlighted in blue, so wait for the text to return to white to proceed with the insertion of
a new font.
Press the button
to delete the last font entered or to exit. At the end confi rm with the key
.
Содержание KTsmart
Страница 1: ...KTsmart INSTRUCTIONS ON INSTALLATION AND USE...
Страница 47: ......