Unic STELLA EPIC 3, Руководство пользователя

Страница: 17 / 20

17
Step 3
The progress bar (blue) indicates the number of cycle finished
Step 4
“Remove the plug, reinsert the filter and press CONFIRM”
Description of the rinsing cycle: (EVX +PUMP) = ON for 45
seconds
When the rinsing cycle is ready to be started, press any key on
the coffee keyboard to start the rinsing cycle and move the cup
as shown on the display
Step 5
Follow the instructions shown on the BTA
Step 6
The BTA displays the message “groups cleaning completed”,
confirm by press Ok button
G.2 External cleaning
Steam output tube:
After each use, clean the steam outlet with a damp cloth and
release steam for a short time to eliminate the mall residue of
milk which has been able to remain in the tube. (Remove the
tip of the steam pipe for easier cleaning).
Rinsing the decompression circuit:
• Engage the cup on the unit by tightening it.
• Press a coffee touch to pressurize the cup, and then stop
the unit. Repeat the operation several times by emptying
the water contained in the cup each time.
Rinsing the cup seal:
• Engage the filter—holder on the unit without tightening it.
• Press a coffee touch by tightening and loosening the filter—
holder alternately, to create a leak at the level of the seal to
clean it.
Basin grille
Remove the basin grille by lifting it up from the front. Clean the
basin with a sponge.
Bodywork
Use a soft cloth and alcohol for the stainless steel parts, and a
nonabrasive cleaning agent for the painted parts. Simply take
care not to scratch the painted parts.
Keyboards cleaning
IMPORTANT
Never clean keyboard with liquid when the machine
is in normal operation.
• Turn OFF the machine by main switch (position 0).
• Clean the keyboards and the front panel with a smooth
towel and an adequate cleaning product.
• When the cleaning is done, turn ON the main switch
(position 2).
H MAINTENANCE
H.1 Maintenance intervals
The inspection and maintenance intervals depend on the
actual machine operating conditions and ambient conditions
(presence of dust, damp, etc.), therefore precise time intervals
cannot be given. In any case, careful and periodical machine
maintenance is advisable in order to minimise service
interruptions.
H.1.1 Preventive Maintenance
Preventive Maintenance reduces downtime and maximizes
machines efficiency.
Customer Care Service can provide advice on the best
maintenance plan to be purchased based on the intensity of
use and the age of the equipment.
It is advisable to stipulate a preventive and scheduled
maintenance contract with the Customer Care Service.
H.2 Softener
Test the water hardness of the network and refer to the
technical documentation of the water softener used for
optimum adjustment.
A softener must be changed every 1 year, even if it does not
reach the end of its filtering capacity.
H.3 Machine disposal
At the end of the product’s life cycle, make sure the equipment
is not dispersed in the environment. The equipment must be