Sowing Machine AMBER 900/3
10
3.
Never apply used oil or lubricants for cleaning hands! It usually contains
particles of metal that may cut your hands and oil may deepen and infect
the cut.
4.
Read labels on the lubricants and safety-related instructions provided by
manufacturers.
5.
Majority of synthetic oils are characterized with caustic properties and are the
source of strong skin irritation.
OIL SPOTS
1. Any oil spots must be gathered with cloth.
2. The collected oil must be disposed according to relevant rules concerning the
environmental protection and waste management.
ACCIDENTS AT WORK
1. If oil spills onto the ground it is required to prevent it from spreading. The
spilled oil must be collected and disposed of together with contaminated
seeds.
2. Oil or lubricants may be the cause of skin irritation.
3. In case oil or lubricants cause skin irritation it is required to consult with a
doctor immediately.
5.
SAFETY INSTRUCTIONS
5.1. TRANSPORT AND MOVEMENT
THE MACHINE MUST BE ALWAYS TRANSPORTED AND PULLED IN
TRANSPORT POSITION /machine is raised/ and:
1. Always comply with the traffic regulations when travelling on public roads.
2. Prepare the unit for transport according to the relevant regulations (required
lights, indicators, warning triangle, etc.).
3. Consider the allowable axle load, gross weight and transport regulations.
4. All the devices driving the machine such as chains, shafts, axles, etc., must be
connected in such a way that possible movements during the transport
cannot affect future operation or transport of the machine.
5. No passengers can be carried on the machine.
6. The machine can be raised only when holding and mounting it in the marked
places.
7. Use only approved cables, belts or chains. Make sure their technical condition
is good before use.
8. If the machine is transported, for example; on a platform or a semi-trailer, it
must be firmly fastened with chains, cables or belts.
9. When the machine is lifted with the use of a crane special attention must be
paid to the machine balance to avoid a risk of the machine drop.
