UNI-T UTS1000B Series Скачать руководство пользователя страница 16

Страница: 16 / 76

User’s Manual UTS1000B/T Series

Instruments.uni-trend.com

16 / 76

please replace it before using the instrument.

Instrument

grounding

To avoid electric shock, the grounding conductor must be connected to the ground.

This product is grounded through the grounding conductor of the power supply. Please

be sure to ground this product before it is powered on.

AC power

supply

Please use the AC power supply specified for this device. Please use the power cord

approved by your country and confirm that the insulation layer is not damaged.

Electrostatic

prevention

This device may be damaged by static electricity, so it should be tested in the

anti-static area if possible. Before the power cable is connected to this device, the

internal and external conductors should be grounded briefly to release static

electricity. The protection grade of this device is 4KV for contact discharge and 8KV

for air discharge.

Measurement

accessories

Measurement accessories are of lower class, which are definitely not applicable to

main power supply measurement, CAT II, CAT III or CAT IV circuit measurement.

Probe assemblies and accessories within the scope of IEC 61010-031, and current

sensors within the scope of IEC 61010-2-032 shall meet the requirements thereof.

Use the input /

output port of

this device

properly

Please use the input / output ports provided by this device in a properly manner. Do not

load any input signal at the output port of this device. Do not load any signal that does

not reach the rated value at the input port of this device. The probe or other

connection accessories should be effectively grounded to avoid product damage or

abnormal function. Please refer to the product manual for the rated value of the input /

output port of this device.

Power fuse

Please use power fuse of specified specification. If the fuse needs to be replaced, it

must be replaced with another one that meets the specified specifications by the

maintenance personnel authorized by UNI-T.

Disassembly

and cleaning

There are no components available to operators inside. Do not remove the protective

cover.

Maintenance must be carried out by qualified personnel.

Содержание UTS1000B Series













































































Результаты поиска

Содержание UTS1000B Series

Отзывы:

Похожие инструкции для UTS1000B Series

Бренды по названию

Популярные бренды

UNI-T UTS1000B Series, Руководство пользователя

Результаты поиска

Содержание UTS1000B Series

Отзывы:

Похожие инструкции для UTS1000B Series

Бренды по названию

Популярные бренды