User’s Manual UTS1000B/T Series
Instruments.uni-trend.com
11 / 76
10MHz clock signal generated by the instrument’s internal reference source, w hich can be used
to synchronize other devices.
Warning
It is forbidden to load input signals on the output port to avoid damage or abnormal function.
3.
Trigger IN: If spectrum analyzer uses an external trigger, the connector receives the rising of falling
edge of an external trigger signal. The external trigger signal is feed in spectrum analyzer by BNC cable.
Warning
It is forbidden to load the input port with a signal that does not meet the rated value, and ensure that the
probe or other connected accessories are effectively grounded to avoid equipment damage or abnormal
function.
4.
HDMI Interface: HDMI video signal output interface.
5.
LAN Interface: TCP/IP port for remote control connecting.
6.
USB Device Interface: Spectrum analyzer can use this interface to connect a PC, which can
be remote control by the software on the computer.
7.
Power Switch: AC power switch, when the switch is enabled, the spectrum analyzer enters
standby mode and the indicator on the front panel lights up.
8.
Power Interface: Power input power.
9.
Burglar-proof Lock: Protect the instrument away from thief.
10.
Handle: Easy to move the spectrum analyzer.
11.
Dustproof Cover: Take off dustproof cover and then to clean the dust.
