UNI-T UT713, Руководство по эксплуатации

Страница: 5 / 25

Warning
Safety Information
This Meter complies with the standard CE EN61326.
To avoid possible electric shock or personal injury:
l
l
l
l
Before using the calibrator inspect the case. Do not use the calibrator
if it is damaged or the case (or part of the case) is removed. Look for
cracks or missing plastic.
During measurement, do not contact the naked wire, connector, unused
terminal or the circuit under test.
Inspect the test leads for damaged insulation or exposed metal. Replace
damaged test leads with identical model number or electrical
specifications before using the Meter.
When using the test leads, keep your fingers behind the finger guards.
Use the Meter only as specified in this operating manual, otherwise the protection
provided by the Meter may be impaired.
l
Never apply more than 30V between any two terminals, or between any
terminal and earth ground.
Model UT713: OPERATING MANUAL
4