UT3500 series
User Manual
32
6. Log/Stat
6.1 Data Log
6.1.1 Enable Log Function
The instrument has a data [LOG] function, which can log 10,000 sets of data. Through the
data logging function, the measurement data can be stored in the instrument buffer in time.
These data can be sent to the computer through the communication interface, or directly
save the CSV format text to the U disk.
Figure 6-1-1-1 Enable [LOG] in the <SYSTEM CONFIG> page
Setting Steps:
1. From the <SETUP> page or the <TEST> page, select the [SYSTEM CONFIG] function
key to enter the <SYSTEM CONFIG> page;
2. Use the cursor keys to move the cursor to the [LOG/STAT] field;
3. Use the function key to select logging, open the data logging function, and set the data
record buffer to the maximum: 10000 groups. You can also directly use the numeric
keyboard to input the required buffer size. For example: 50<In> to set the buffer size
to 50 groups.
4. After enabling, there will be a [LOG] field on the <TEST> page. If you need to log,
please enter the <TEST> page, move the cursor to the [LOG] field, and press the
function key [START] at the bottom of the screen, as shown in Figure 6-1-1-2.
5. After the data logging is automatically started, you can use the function key to stop the
current logging at any time; you can also save the data to the U disk at any time; you
can also stop and clear the data buffer.
