Quality Tools for Smart Cleaning
www.ungerglobal.com/hydropower
14
Hydropower dI
Technical Data
7. Technical Data
*
These values are based on the „DIxxT“ variation, including resin bags, TDS-meter, excluding wheels
or cart. For variation „C“ with cart please consider following values:
Size incl. wheels (WxDxH): 55 x 108 x 67 cm. Weight (cart): 12,30 kg.
WarnIngs: read Before using!
•
Do not drink the water produced by this system. Water produced by the
HydroPower DI system is too pure and will rob the body of vital minerals and nutrients
if imbibed in quantity.
•
Prior to opening vessel housings, turn off water and relieve pressure in hose.
Press the yellow FastLock Opening lever on top to get pressure out of the
housings.
•
If you use the QuickChange resin bags (recommended), pay attention on correct
position (be sure to seat bags with zip-tie facing up and sewing in parallel to vessel
ledge.
•
If you use loose resin, pay attention on correct filling and prevent overfilling.
•
After a longer non-usage period, flash the filter thoroughly so that only fresh water is
in.
tIps:
•
Clean highest windows first. Start at the top of each window and clean using vertical strokes with moderate speed.
•
DI Systems eliminate spotting so when you are finished cleaning, let the surfaces air dry - no need to wipe.
(NOTE: First time cleaning with pure water may necessitate washing windows twice for maximum results.
Factor
DI12T
DI24T
DI48T
Shipping weight incl resin*
11 kg
20 kg
35 kg
Max. recommended power (l/min.)
6
10
20
Height*
35 cm
59 cm
116 cm
Inner Diameter
20
20
20
Dimension of base
28 x 30cm
28 x 30cm
28 x 30cm
QuickChange Resin Bags
1
2
4
Max. fill with loose resin
6,25 l
12,5 l
25 l
Max. permanent pressure (bar)
8
8
8
Max. water temp. (°C)
30
30
30
Min. water temp. (°C)
2
2
2
