Underground Magnetics Mag System, Руководство пользователя

Страница: 40 / 63

40
Rotate drill head until roll indicator
points toward target dot.
Instructions will change from the
clockwise arrow to
“ STOP ”
Rotate drill head to next position in
sequence before
“ P ” counts down
to 0 or the sequence will be
cancelled.
If the next step has the target dots
in the same place as the previous
step, rotate the drill head one
entire rotation until the roll
indicator lines up with the target
dots again.
Once all six steps of the sequence are complete,
change the Transmitter Settings on the receiver
(B3) to match
the new
frequency and
power levels.