UNAOHM AP 301 Скачать руководство пользователя страница 30

Страница: 30 / 53

AP301-FULL-HD_rev.09_UK

4.11.

THE MAIN MENU

Keep the

MENU

key pressed for approx. 2 seconds to activate the Main Menu, which is

used to personalize functioning mode and carry out settings or less common operations.

Select the desired item through the shaft encoder and confirm pressing

ENTER

Press the

MENU

key to exit.

4.11.1.

FUNCTIONS OF THE MAIN MENU

4.11.1.1.

DATE

It sets the current date through the shaft encoder. Day, month and year may be run

through pressing

ENTER

4.11.1.2.

TIME

It sets the current time through the shaft encoder. Hour, minutes and seconds may be run
through pressing

ENTER

4.11.1.3.

CONFIGURATION

It indicates the software version of the instrument, the list of installed options and their
possible specific software settings.

4.11.1.4.

NOISE GENERATOR

It alternatively activates (ON) or deactivates (OFF) the noise generator. The message “not

installed” appears when this device is not installed.

4.11.1.5.

LANGUAGE

It sets the menu language. Press

ENTER

and turn the shaft encoder.

4.11.1.6.

PLUG and PLAY

It activates or deactivates the Plug-and-Play function, which must be enabled when

hardware modifications are brought to the instrument (for example when the user adds an

optional board).
If this function is disabled, the instrument switches on faster.

4.11.2.

KEYS WITH 2

FUNCTION

A small blue box above some keys indicates a second function associated to these keys, to

quickly enter the following functions:

⇒

2nd+ACS:

the ACS function (Automatic Channel Search) enables an automatic

search of terrestrial channels; when it is activated, the following information is

displayed:

•

indications about channelization

•

kind of search to be carried out (only analogue channels, only digital channels or

both analogue and digital channels)

•

minimum level, for analogue channel, under which this search is not carried out

•

minimum power, for digital channels, under which this search is not carried out

•

level of the highest analogue channel which has been found during this search

•

power of the most powerful digital channel which has been found during this search

•

a table displaying the sequence number, channel, kind of channel, measured level.

Содержание AP 301






















































Результаты поиска

Содержание AP 301

Отзывы:

Похожие инструкции для AP 301

Бренды по названию

Популярные бренды

UNAOHM AP 301, Руководство пользователя

Результаты поиска

Содержание AP 301

Отзывы:

Похожие инструкции для AP 301

Бренды по названию

Популярные бренды