UNAC PHOBOS BT-UL Скачать руководство пользователя страница 3

USER’S MANUAL

ENGLISH

Thank you for buying this product, our company is sure that you will be more 
than satisfied with the product’s performance. The product is supplied with 
a “

Warnings

” leaflet and an “

Instruction booklet

”. These should both be 

read carefully as they provide important information about safety, installa-
tion, operation and maintenance. This product complies with the recognised 
technical standards and safety regulations. 

1) GENERAL OUTLINE

Electromechanical piston designed to automatically operate residential gates. 
The irreversible gearmotor keeps the gate locked both in the closing and 
opening positions, making the use of the electric lock redundant.
The actuator is supplied with an electronic torque limiter. The unit is controlled 
by means of an electronic control board with torque adjustment. End-of-stroke 
operation is controlled by two magnetic limiting devices.

The following optional accessories are available on request:

- Buffer battery kit mod. BT-BAT

Allows  operation  of  the  automation  even  when  there  is  no  mains  power 
supply for a short period of time.

2) SAFETY

If correctly installed and used, this automation device satisfies the required 
safety level standards. However, it is advisable to observe some practical 
rules in order to avoid accidental problems.  
Before using the automation device, carefully read the operation instructions 
and keep them for future reference.
•  Keep children, persons and things outside the automation working area, 

particularly during operation. 

•  Keep  radio  control  or  other  control  devices  out  of  children’s  reach,  in 

order to avoid any unintentional automation activation. 

•  Do not intentionally oppose the leaf movement. 
•  Do not attempt to open the gate by hand, if the actuator has not been 

released by means of the appropriate release knob.  

•  Do not modify the automation components. 
•  In case of malfunction, disconnect the power supply, activate the emer-

gency release to gain access to the actuator and request the assistance 
of a qualified technician (installer). 

•  Before  proceeding  to  any  external  cleaning  operation,  disconnect  the 

mains powers supply. 

•  Keep the photocell optical components and luminous signal indication 

devices clean. Check that the safety devices (photocells) are not obscured 
by branches or shrubs.

•  For any direct assistance to the automation system, request the assistance 

of a qualified technician (installer). 

•  Have qualified personnel check the automation system once a year, and 

in particular control mechanism for force, speed, and sensitivity.

•  ENTRANCE IS RESERVED FOR VEHICLES. PROVIDE A SEPARATE 

ENTRANCE FOR PEDESTRIANS.

3) EMERGENCY MANOEUVRE

All controllers feature a key release mechanism. After lifting the lock cover 
(fig.1), insert the release key supplied and turn it clockwise by 90°.
Push the leaf manually to open the gate. To reset the motorised operation, 
turn the key in the opposite direction and refit the cover.

4) MAINTENANCE AND DEMOLITION
The maintenance of the system should only be carried out by qualified 
personnel regularly.

 

If the power supply cable is damaged, it must be replaced by the manufacturer 
or its technical assistance service, or else by a suitably qualified person, in 
order to prevent any risk.
The materials making up the set and its packing must be disposed of accor-
ding to the regulations in force.

Batteries must be properly disposed of.

Fig. 1

WARNINGS
Correct controller operation is only ensured when the data contained 
in the present manual are observed. The company is not to be held 
responsible for any damage resulting from failure to observe the 
installation standards

 

and the instructions contained in the present 

manual.

The descriptions and illustrations contained in the present manual are 
not binding. The Company reserves the right to make any alterations 
deemed appropriate for the technical, manufacturing and commercial 
improvement of the product, while leaving the essential product fea-
tures unchanged, at any time and without undertaking to update the 
present publication.

PHOBOS BT-UL Ver. 04 - 

3

D811333_04

Содержание PHOBOS BT-UL

























Отзывы: