Umarex Laserliner ThermoCamera-Vision, Руководство пользователя

Страница: 35 / 132

0.93
0.93 0.93
0.93
2 m
2 m 2 m
2 m
0.0 °C
0.0 °C 0.0 °C
0.0 °C
21.0 °C
-20~150°C
60 %
21.1 °C
Global Para
Measure Setting
Alarm
Reset Para
Emiss:
Distan:
Offset:
Reset Para
Emiss:
Distan:
Offset:
Reset Para
Emiss:
Distan:
Offset:
Reset Para
Emiss:
Distan:
Offset:
Global Para
Global Para Global Para
Global Para
Range:
Env:
Humidity:
Ref. Temp:
Measure Setting
Reset all parameters to default?
Yes No
ThermoCamera-Vision
8.2
8.5
8.3
8.4
35
GB
Remove
object
Measurement-speci Ƃ c settings
Offset temperature
The offset temperature allows
you to balance temperature
differences for the entire
thermogram (see also
chapter 10).
Pre-selection of
measurement range:
-20 °C … 120 °C (ideal for
interior and exterior)
0 °C … 400 °C (ideal for
industrial applications)
Ambient temperature
Rel. humidity
Re
× ection temperature
The following measurement-speci Ö c settings must be adjusted to the climatic conditions before starting
measurements. Starting from 10 m distances, the atmospheric in × uences of the air must always be taken
into account. This is required for the internal sensors to be able to accurately determine the infrared
emissions of the measured object. Please also consider chapters 8.1 and 8.2 in this regard.
Reset general parameters
Factory settings
Emissivity coef Ö cient 0,95
Distance 2 m
Ambient temperature 25 °C
Rel. humidity 60 %
Re × ection temperature 25 °C
Offset temperature 0 °C
To learn about
correcting climatic
conditions, please
see chapter 8.5.
Before adjusting complex settings, use this function to reset all parameters to the default factory
settings in order to quickly and safely achieve the desired settings from here.
!
Manual_ThermoCamera_Vision_Rev.0113.indd 35 25.01.13 10:06