background image

A

 

To Safely Use This Equipment 

Thank you for purchasing our product. This pump is designed exclusively for vacuum evacuation, and 
it may malfunction or cause accidents if operated inappropriately. Please read the manual thoroughly, 
and pay specific attention to inspection, maintenance and safety guidelines. Read and fully 
understand the description of this manual to prevent serious accidents from occurring. 

The copyright of this user’s manual and safety guides are reserved by Technical Division of Ulvac 
Kiko. No part of this document, in whole or part may not be reproduced without permission of Ulvac 
Kiko Inc.

 

Read this section before using the VWR-400M/ERH. Always follow the instructions 
below to safely use the device and prevent personal injuries from occurring.   

The symbols below have the following meaning. 

 
 
 

 

Danger 

Incorrect handling of the equipment is very likely to result in 
death or serious injury to the operator. 

 

Warning 

Incorrect handling of the equipment may result in death or 
serious injury to the operator. 

 

Caution 

Incorrect handling of the equipment may result in light or 
medium injuries to the operator or damage to the equipment. 

 

This indicates action or practice that should be made. 

 

Always make connection with the earth. 

 

This indicates the action or practice that should be prohibited. 

 

Do not disassemble. 

 

Do not touch. 

 

Содержание VWR-400M/ERH





































Отзывы: