Ulvac UMP-40W, Инструкция по эксплуатации

Страница: 20 / 52

14 ULVAC CRYOGENICS INCORPORATED
Power source for GN-30i (when using GN-30i)
Voltage : 200 VAC
±
10% (50/60Hz) , single-phase
Power capacity : 15 A or above
Power consumption : 1.2 kW (50/60Hz)
Connection : Round type crimping terminal for M4
Use D-type earth ground for safety.
If cooling water temperature is lower than 10°C, stop the water flow when the compressor is
suspended. If cooling water of below 10°C is kept flowing, it may raise viscosity of lubricant oil
and the compressor may fail to startup when turned on.
CAUTION
CAUTION