Ulvac UMP-40W, Инструкция по эксплуатации

Страница: 17 / 52

ULVAC CRYOGENICS INCORPORATED 11
Specifications
Liquid nitrogen generator
Type : UMP-40W
Liquid nitrogen production : 40L/day (60Hz)
Dimensions : 1095[W] x 750 [D] x 1793 [H]
Weight : Approx. 430 kg
Cold head type : RMS150T
Compressor type : C30PMVRT
Cooling method : Water-cooled
Ambient conditions : Ambient temperature: 10 – 35°C
Relative humidity: 80% or less
(Non-condensation other than LN
2
dispense port)

UMP-40W must be installed indoors.

UMP-40W must not be used in the atmosphere with organic solvents or corrosive gases.
PSA (Pressure Swing Adsorption) nitrogen gas generator
Type : GN-30i
Dimensions : 600[W] × 650[D] × 1200[H]
Weight : Approx.120kg
Cooling method : Air-cooled (Intake from front, exhaust from back)

GN-30i must be installed indoors.

GN-30i must not be used in the atmosphere with organic solvents or corrosive gases.

Air inhaled from the front is discharged to the backside. Do not block these areas.
Power source (for UMP-40W)
Rated working voltage : 50Hz 190 - 220VAC, 60Hz 200 - 230VAC
three-phase
Power capacity : 30 A or above
Power consumption : 7.5kW
Connection : Round type crimping terminal for M5
Use D-type earth ground for safety.
CAUTION