Ulvac PBL Series, Инструкция по эксплуатации

Страница: 17 / 47

5
1.6.2 Transport of heavy objects
Never get under this pump.
The pump may fall or topple if a forcible operation is performed or if the equipment is
not sufficiently maintained. Never get under this pump.
Never perform loading work or operate the cargo-handling machine if you do
not have the appropriate certifications.
Failure to observe this instruction may lead to accident or injury.
1.6.3 Electrical shock
Before connecting the power, turn off the primary power supply.
Before inspection or relocation, turn off the primary power supply.
Be sure to connect the ground terminal.
A certified electrical worker must embed grounding or connect the ground line.
Incomplete grounding incurs the risk of electrical shock.
1.6.4 High temperature
Do not touch the pump's main unit, motor, or piping during operation.
Do not touch the pump's main unit, motor, or piping during operation because they
are very hot. Failure to observe this instruction may lead to burns.
Wait until the pump temperature drops.
The pump is hot immediately after operation stops. Wait a while until the pump
temperature drops and then perform inspection. Failure to observe this instruction
may lead to burns.
1.6.5 Ruptures
Do not increase the pressure on the pump's exhaust side to 0.03 MPaG or
higher.
Measure the pressure on the pump's exhaust side. If the pressure is 0.03 MPaG
(gauge pressure) or higher, remove any objects that prevent gas on the exhaust port
side from passing.
If the pump's internal pressure exceeds 0.03 MPaG, the pump may rupture.