-05-
0.4
Receiving and storing the pump
0.4.1
Receiving the pump
The pump has been shipped with great care, however the following
procedure is recommended once the packing has been removed.
(1) Check that the product is as ordered.
(2) Check that all the accessories are there.
(3) Check that no damage has occurred in transit.
(4) Check that no nuts or bolts have become loose in transit. Have any nuts
come off?
Contact your dealer or Ulvac if a problem has occurred.
0.4.2
Surroundings during storage, mounting, and operation
This pump is designed with very tight tolerances, and the following conditions
must therefore be satisfied during storage, mounting, and operation.
(1) Temperature and humidity in operation: humidity at 7ºC – 40ºC, 85% or
less RH
(2) Maximum height above sea level during storage and operation: 1,000 m
(3) Other (during storage and operation)
a) No corrosive or explosive gas.
b) No condensation.
c) No dust.
d) Installed indoors.
e) Not stacked on other items, or likely to fall.
f) Not in direct sunlight.
g) Not near a heat source.
h) Pump oil put in the pump and inlet port sealed with a cap if stored for a
long period of time.
i) Not stored with moisture inside pump.
The pump weighs 20kg or more, and lifting or moving it alone may therefore result in
injury. Failure to do so may result in injury. Always ensure that at least two people
perform the installation as shown in 3.1 Installation.
Caution
