18
(6) Mount a new valve according to Photo 17.
(7) Mount the pump head on valve retainer.
(8) DA-41D (81S)
Mount inlet / exhaust pipe, front panel, and top panel.
* Procedure is the same as (14) to (16) of 1) replacement of Diaphragm.
.
● Be careful not to make a mistake in type / number of
sheets. (Photo 17)
● There is no front and back control in valve mounting.
Mount it arbitrary.
CAUTION
● Make sure no gripping of valves and O rings.
● Tighten several times in diagonal
/ even 5 N
·
m
tightening torque.
CAUTION
