background image

 

 

18 

10. CONCLUSION 

This manual contains only general information about pump operation. Therefore, if you come up 

with any question or trouble, contact our representative or ULVAC KIKO. 

 

Warranty 

 

(1) The warranty for this pump (this equipment) extends for a period of one year from the date of shipment. 

(2) Any malfunctions or defects which occur under normal usage conditions during the warranty period will 

be repaired free of charge. 

Note, the warranty stated here is an individual warranty covering the pump. In addition, the scope of the 

warranty coverage concerning repairs is limited to the repair and/or replacement of parts. 

Normal usage conditions refer to the following: 

a) Ambient temperature and humidity during operation: 7 - 40

°

C, below 85% RH 

b) Operation in accordance with the user manual 

(3) Repair fees will incur during the warranty period for the following cases: 

a) Malfunctions due to a natural disaster or fire. 

b)  Malfunctions  caused  by  special  atmospheric  conditions,  such  as  salt  damage,  inflammable  gas, 

corrosive gas, radiation or pollution. 

c)  Malfunctions  caused  by  usage  conditions  that  differ  from  those  stated  in  the  user  manual 

(performance specifications, maintenance and inspection, etc.). 

d) Malfunctions caused by modifications or repairs carried out by a party other than the manufacturer, 

or by a service company not approved by the manufacturer. 

e) Malfunctions caused by noise (electric disturbance). 

f) Malfunctions that occur when not using a rated power supply. 

g)  Malfunctions  that  occur  when  there  is  an  abnormal  rise  in  internal  pressure  due  to  the  pump 

exhaust outlet being blocked during operation, etc. 

h) Malfunctions that occur, when the pump is damaged as a result of being dropped or falling, etc. 

i)  Malfunctions  which  are  determined  by  the  manufacturer

s  technical  personnel  to  be  caused  by 

conditions that do not comply with the usage conditions for this vacuum pump. 

j) Malfunctions due to the replacement of consumables.         

(4) Disclaimer 

a) We shall not be liable for any malfunctions of our products caused by the customer, regardless if 

the  malfunction  does  not  fall  within  the  warranty  period,  nor  shall  we  be  liable  for  any  loss  of 

opportunity for the customer

s clients or for compensation for any damages to other products, labor 

costs, production loss, transportation expenses and other related work.   

b) We shall not be liable for any claims and patent infringements, including secondary damages, filed 

a claim by a third party against the customer.

 

Содержание DA-20D Series

























Отзывы: