Ultrative WOC, Руководство пользователя

Страница: 19 / 60

WPA/WPA2-PSK is applied, the encryption type should be AES and the key 12345678 .
3. Select Lazy as WDS mode, AES as the encryption mode and set the key to 12345678 .
4. Set the SSID, operating mode, security mode, encryption type, key and channel of a router to be
identical with those on the WOC. If the WDS mode is repeater, the settings of encryption type
and key are the same with that of WOC. Click AP scanning to add the MAC address of the
WOC.
5. Disable DHCP services on the router and set the LAN port address of the router in the same
network segment with that of the WOC. After that, all configurations are completed. Reboot
both the WOC and the router.
Notes
Both the connected wireless routers are required to support WDS and come with the same SSID,
operating mode, security mode, encryption type, key, and channel.
If the WDS mode of one wireless router is Repeater, its DHCP services should be disabled, and its
LAN port address should be in the same network segment with the other one.
MAC Filtering
MAC addresses can be filtered to prevent certain terminals from joining the WLAN.
Settings of MAC Filtering
1. Click Network from the home page.
2. Click Wireless > MAC address filter , and tick off the Enable option.
3. Add MAC addresses to the
Reserved MAC address table
.
4. Select the Access control policies . There are two options. One option is allowing the wireless
connection based on the MAC address in the list, but prohibiting the wireless connection based
on other MAC addresses. The other option is prohibiting the wireless connection based on the
MAC address in the list, but allowing the wireless based on other MAC addresses.
5. Click Save .
Note: A maximum of 20 MAC addresses can be added to the
Reserved MAC address table.
19